Falquon Flooring High Gloss MAX 8mm White High Gloss Laminate Flooring (C500)

Laminate flooring that has a click system does not require any adhesive. The boards are very easy to install as a floating floor, and the click system keeps the boards locked in place. 

You should always use an underlay with any laminate floor, what type of underlay is usually determined by the room the floor is going to be installed in, and what sub-floor will be underneath.

To clean this product we recommend using a softy microfibre cloth or mop, with simply water or a very light soap solution.

To ensure the floor remains as good as new, the care and advice instructions provided by the manufacturer suggest this floor is not hoovered or brushed, as this may scratch the flooring.

Hi,

This flooring can be used over an underfloor heating system. Like most flooring, you should ensure the surface temperature of the floor once laid does not exceed 27 degrees.

To clean this product we recommend using a softy microfibre cloth or mop, with simply water or a very light soap solution.

We would highly recommend not using a steam cleaner with any wooden floor.

Hi,

This flooring is fine for use in area where it may get wet, providing the flooring is sealed .We recommend a hydrokit sealant for the edges of the room where an expansion gap should be left, and also a click and seal, which can be applied to the edges of the boards when installed.

Hydrokit

https://www.leaderfloors.co.uk/flooring-c7/310ml-water-resistant-transparent-hydrokit-p38865

Click and seal

https://www.leaderfloors.co.uk/flooring-c7/accessories-c134/fitting-your-floor-c137/125ml-seal-and-click-sealant-p38871

Hi,

This is a question we get asked regularly with regards to scratch resistance. We sell Elesgo and Falquon high gloss flooring, but brands use the same technology behind the surface layer. The flooring is as hard wearing if not more so that other leading brands on the market, you can find the test data on the link below.

http://www.leaderstores.co.uk/blog/2014/11/is-elesgo-supergloss-flooring-scratch-proof/

While high gloss flooring is resistant to scratches, it is not scratch proof. It is important that precautions are taken to keep the floor as good as new, such as feet protectors on furniture, correct methods of cleaning, and no shoe policy in areas of high footfall. 

When high gloss flooring is marked, it will have a tendency for marks to show up more clearly that on wood imitation laminate floors with a matt finish. However, when cared for correctly high gloss flooring can last many years maintaining it's high quality glossy striking finish.

Hi Lucie,

If we have stock and sample available that are cut and ready to send, you should see a button on the flooring calculator underneath the 'add to basket' button. If this option is not there, please drop us an email to sales@leaderfloors.co.uk with your postal address and the product you wish to obtain a sample of. We will get back to you within 24 hours to let you know if we can do fulfill your request.

Hi,

This means that the product can be used in areas where the flooring may get wet, however extra care needs to be taken. By this we mean that the flooring needs to be sealed where any standing water may get underneath, which would be where the expansion gap is left around the perimeter of the room. You can seal the floor by applying a silicone sealant around the expansion gap, which can be hidden underneath a beading.

We sell a sealant designed for this purpose which you can find on the link below.

https://www.leaderfloors.co.uk/flooring-c7/accessories-c134/installation-tools-c137/quickstep-310ml-water-resistant-transparent-hydrokit-p38865

Kind regards

Hi,

This flooring is fine for use in area where it may get wet, providing the flooring is sealed .We recommend a hydrokit sealant for the edges of the room where an expansion gap should be left, and also a click and seal, which can be applied to the edges of the boards when installed.

Hydrokit

https://www.leaderfloors.co.uk/flooring-c7/310ml-water-resistant-transparent-hydrokit-p38865

Click and seal

https://www.leaderfloors.co.uk/flooring-c7/accessories-c134/fitting-your-floor-c137/125ml-seal-and-click-sealant-p38871

Hi,

Yes this is something that can and has been done before by our customers. For example the black and white high gloss tiles can be used together to create a striped or check effect. The only rule is that the floors must be from the same range and the same thickness, as the click system on the boards will be different for each brand and each thickness.

Many thanks